Culligan ® RVF-10 # 145808 Recreational & Marine Water Filter - NCP-10 # 155367 Replacement Water Filter Cartridges

water filters reverse osmosis membranes
 Free Filter Change Reminder Email Service - Sign Up Now water filters, replacement cartridges, reverse osmosis membranes, water tests, complete parts department


water filters, replacement cartridges, reverse osmosis membranes for Everpure, Ametek, Culligan, RainSoft, US Filter, Pentek, Plymouth, Harmsco, Aqua-Pure, EcoWater, Hydrotech, Whirlpool, GE
Home | Replacement Water Filters | Reverse Osmosis Systems | Whole House Water Filters
 Refrigerator Water Filters | Pool and Spa Filters | Boat & RV Water Filters | Parts Department
 Installation and Trouble Shooting Guide | Gift GuideMy Account | Check Out

 
water filters reverse osmosis membranes
  Replacement water filters and reverse osmosis membranes - Visa accepted Replacement water filters and reverse osmosis membranes - Master Card accepted

Large selection of replacement water filters, reverse osmosis membranes, testing kits and water filtration repair parts.  From one water filter or reverse osmosis membrane to case quantity discounts.
LOW PRICES and FAST SHIPPING SINCE 1999 !
99.5% Of All Items In Stock For Same Day Shipping!

Replacement water filters and reverse osmosis membranes - Discover accepted Replacement water filters and reverse osmosis membranes -Amex accepted  
water filters reverse osmosis membranes


The Culligan ® * RVF-10 #145808 water filter system is designed to reduce foul tastes, odors and sediment from potable drinking water, or other garden hose attachment uses.  This system includes 3/4" flexible hose couplings, and the NCP-10 replacement cartridge.  Easy to hookup to a garden hose and provide filtered drinking water to RV Recreational Vehicles, Boats, Spot Free Car Wash Rinse (DI), Swim Pools, Plants, etc..

Culligan #145808 RVF-10 Recreational Vehicle Filter - Garden Hose Attachement
 

Price Each: $31.99

Mounting Bracket

Additioal NCP-10 Filter Cartridges

Filter Wrench

Quantity:
Check Volume Discounts


Email a Friend

Culligan #145808 RVF-10 Recreational Vehicle Or Boat Filter - Garden Hose Attachement

Culligan #145808 RVF-10 Recreational Vehicle or Boat Filter - Garden Hose Attachement. The RVF-10 system is designed to reduce foul tastes, odors and sediment from potable drinking water. This system includes 3/4" flexible hose couplings, integrated pressure relief valve and the NCP-10 replacement cartridge.

Filters & Parts

Culligan RVF-10 Owners Manual

NCP-10 Ametek / US Filter / Plymouth / Pentek / Culligan / Kleen Plus / American Plumber / Bruner / Many Other Brands Compatible NCP-10 Taste & Odor Water Filter # 155367


Replacement Filter For Culligan ® * RVF-10


Price Each: $8.99

Quantity:
Check Volume Discounts


Email a Friend

Pentek NCP-10 # 155367 NCP10 Taste & Odor Water Filter Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands

Ametek / US Filter / Plymouth / Pentek / Culligan / Kleen Plus / American Plumber / Bruner / Many Other Brands Compatible NCP-10 Pleated Carbon-Impregnated Polyester 10 Micron Taste & Odor Water Filter. A nice upgrade from the C-1 (155002). 9 3/4" long X 2 1/2" diameter. 24 per case, sold individually. Ametek # 155367 NCP Series cartridges are constructed from a carbon-impregnated non-cellulose media. They offer sediment-filtration, as well as taste, odor and chlorine reduction in one cartridge. Unlike cellulose cartridges, NCP Series cartridges are resistant to both bacterial attack and biofilm buildup allowing them to be used for municipal and non-chlorinated water applications. Pleats provide additional surface area for high dirt-loading capacity, while maintaining minimal pressure drop. This combination of pleated polyester media and carbon filtration produces an outstanding filter cartridge with extended service life. NCP Series cartridges are an excellent polishing filter, and are ideal for post reverse osmosis and well water applications. Order a case and save even more.

Pentek ® 150578 Mounting Bracket Kit For 3/4 Inch Standard Water Filter Housings
 

Price Each: $9.99

Quantity:
Check Volume Discounts


Email a Friend

Pentek ® 150578 Mounting Bracket Kit For 3/4 Inch Standard Water Filter Housings

MC-1A Pentek ® 150578 Mounting Bracket Kit For 3/4" Standard Water Filter Housings. Fits all 10" & 20" Pentek 3/4" Standard Female NPT threaded heads. Bracket and screws.

SW-1 Ametek / US Filter / Plymouth / Pentek / Culligan / Kleen Plus / American Plumber / Bruner / Many Other Brands Compatible SW-1 Slim Line Water Filter Housing Wrench # 150294
 


Price Each: $6.99

Quantity:
Check Volume Discounts


Email a Friend

Pentek SW-1A # 150539 SW1 Slim Line Water Filter Housing Spanner Wrench Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands

Pentek SW-1 # 150539 SW1 Slim Line Water Filter Housing Spanner Wrench Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands. SW-1 Water Filter Housing Wrench. Fits 4" Slim Line Housings. (Slim Line Housings Have A 3 1/2" diameter "O" Ring) Ametek # 150294 Only for use in loosening filter housings, never to tighten. Overtightening may cause damage to the O-rings and make re-opening VERY difficult. Hand tighten only. Fits most standard style RO systems. Replaces 150294. For really stubborn filter housings our technicians will use two wrenches together for maximum power where one wrench might break or not do the job. Our techs know the tricks.

Order New O-rings And Be Sure To Lube Them With Dow 111 Silicone Sealant To Prevent Leaks

Ametek / US Filter / Plymouth / Pentek / Culligan / Kleen Plus / American Plumber / Bruner / Many Other Brands Compatible O-Ring For Slim Line Water Filter Housing # 151121
 

Price Each: $4.99

Dow 111 Silicone Sealant

Quantity:
Check Volume Discounts


Email a Friend

Pentek # 151121 O-Ring For Slim Line Water Filter Housing Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands

Pentek # 151121 O-Ring For Slim Line Water Filter Housing Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands. O-Ring For Slim Line Water Filter Housing. Buna-N FDA Grade. (Slim Line Housings Use A 3 1/2" diameter "O" Ring) Ametek # 151121 Same as Culligan OR-38 O-ring.

Be Sure To Order Dow 111 Silicone Sealant To Help Prevent Leaks!

Dow Corning ® 111 6 gram O-ring Silicone Lubricant and Sealant
 

Price Each: $3.99

Package Size

Quantity:
Check Volume Discounts


Email a Friend

Dow Corning (Molykote) ® 111 6 gram O-ring Silicone Lubricant and Sealant - Be sure to lube your O-rings to help prevent leaks.

Dow Corning/Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - 6 gram pillow pack. (like a ketchup packet) Great O-ring sealant and lubricant. FDA and NSF approved. (Do Not Use Petroleum Jelly As It May Break Down O-rings Or Housings) This is the same premium grade silicone sealant and lubricant used in underwater photography cameras, scuba gear and other underwater applications that simply can't afford leaks. Why not use the best for your reverse osmosis or drinking water filtration system?

Dow 111 Silicone MSDS Safety Sheet


Use a DI (Deionization) Filter Cartridge For A Spot Free Car Wash Rinse.
PCF1-10MB Ametek / US Filter / Plymouth / Pentek / Culligan / Kleen Plus / American Plumber / Bruner / Many Other Brands Compatible PCF1-10MB Deionization Water Filter # 155273
 

Price Each: $29.99

Quantity:
Check Volume Discounts


Email a Friend

Pentek PCF1-10MB # 155273 PCF110MB Deionization Water Filter Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands

Pentek PCF1-10MB # 155273 PCF110MB Deionization Water Filter Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands Deionization Water Filter. FDA D.I. Resin. 9 3/4" long X 2 7/8" diameter. 6 per case, sold individually. Ametek # 155273 PCF Series cartridges have been developed in response to the requirements for deionized water in many industries. They are manufactured using an FDA-compliant resin that has been subjected to additional post-production steps to minimize the total organic carbon (TOC) level. This high capacity, semi-conductor-grade resin cartridges are ideal for use in pharmaceutical and medical laboratories, cosmetics and circuit board printing applications. Order a case and save even more.


Culligan ®* Recreational Vehicle/Marine Water Filter System RVF-10 Installation and Operation Instructions


INSTALLATION


1. Wrap the 3/8-inch fitting (on the 3/4-inch female hose adapter) with Teflon® tape (included), and screw into the INLET side of the filter system. Wrap the male hose adapter with Teflon tape and screw into the OUTLET side of the filter system. Use a wrench to tighten firmly. DO NOT OVERTIGHTEN. About one thread should remain visible when fittings are tightened.


2. To protect the system from possible damage, install the system between two hoses. The short hose (included) should be used to connect the outlet side of the filter system with the storage tank inlet. A sanitary hose can be used to connect the water faucet to the inlet side of the filter system.


3. Before running water through the RVF-10 system into the storage tank, flush out any carbon fines that may be present in the carbon cartridge. Disconnect the hose at the storage tank and turn the water supply on for approximately one minute. Turn off water supply and reconnect the hose to the storage tank. Installation is now complete.


WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. CAUTION: The RVF-10 system must be protected from freezing. Failure to do so may result in cracking of the filter and water leakage.

Culligan RVF-10 #145808

CARTRIDGE REPLACEMENT


1. To change the cartridge, turn off the water supply and depress the red pressure relief button.


2. Unscrew the filter housing. Remove and discard the existing cartridge.


3. Rinse out the filter housing and scrub the inside with mild soap and warm water using a non-abrasive, clean sponge. Also scrub the inside areas of the filter cap. Rinse thoroughly with clean water.


4. Remove O-ring from the groove in the housing and wipe groove and O-ring clean. Lubricate O-ring with a coating of Dow 111 Silicone Sealant. Place O-ring back in the groove and wipe or press it down into the groove using two fingers.  NOTE: The rubber O-ring provides a water-tight seal between the cap and the bottom of the housing. It is important that the O-ring be properly seated in the groove below the threads of the housing or a water leak could occur.


5. Place the new cartridge into the filter housing and screw back onto the filter cap. DO NOT OVERTIGHTEN.


6. Before running water through the RVF-10 system into the storage tank, flush out any carbon fines that may be present in the carbon cartridge. Disconnect the hose at the storage tank and turn the water supply on for approximately one minute. Turn off water supply and reconnect the hose to the storage tank. The replacement cartridge should be changed when the original foul tastes or odors appear or when there is a noticeable drop in water pressure at the filter housing outlet.


The RVF-10 system is designed to reduce foul tastes, odors and sediment from potable drinking water.  This system includes 3/4" flexible hose couplings, and the NCP-10 replacement cartridge.

Included:
female hose adapter
short hose
filter housing
male hose adapter
filter cap

Not Included
water supply hose
 

When the RVF-10 system is not being used for a period of time, the cartridge should be removed and discarded.   When the system is to be used again, the flushing procedure should be followed. (See step 6 of Cartridge Replacement instructions.)

REPLACEMENT PARTS
Filter Cap . . . . . . . . . . . . . . . . . . . . . . .. . . . . .154159
Filter Housing . . . . . . . . . . . . . . . . . . . . . . . . . .153049
Culligan ® O-ring OR-38 (not shown) . . . .  . . . . . . . . . . . . .151121
Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144114
Hose Fitting Kit . . . . . . . . . . . . . . . . . . . . . . . . .144364
Spanner Wrench SW-1 (optional) . . . . . . . . . . . .150294
NCP-10 Filter Cartridge (included) . . . . . . . . . . .155367

NOTE: This system may reduce water flow slightly.

TROUBLESHOOTING


Leaks between cap and bottom of housing:
1. Turn off water supply and remove bottom of filter housing.
2. Clean O-ring and O-ring groove (located directly beneath threads of housing). Lubricate O-ring with Dow 111 Silicone Sealant and replace securely into groove. Screw bottom of housing onto cap and hand-tighten.

Leaks on inlet/outlet connections:
1. Turn off water supply.
2. Tighten fittings 1/2-turn. Do not overtighten.


Parts Department Featured Items For Water Filtration And Reverse Osmosis RO Systems
 
TDS Meter - Tester To Test For Total Disolved Solids In Water


How Pure Is Your Water?    Find Out!

Price Each: $37.99

Calibration Solution

Quantity:
Check Volume Discounts


Email a Friend

TDS Meter - Test For Total Dissolved Solids In Water - Reverse Osmosis Membrane Tester - TDS Meter

TDS Meter - Tester. The Only Way To Know If Your Reverse Osmosis RO Membrane Is Performing Correctly - Tests for TDS - Total Dissolved Solids. A Must For All RO System Owners. Compare Incoming Feed Water To Treated Water - Replace Membrane If Less Than 80% of TDS Is Being Removed - Total dissolved solids (TDS) are the total weight of all solids (minerals, salts or metals) that are dissolved in a given volume of water expressed in milligrams per liter (mg/L), or in parts per million (PPM). The lower the TDS level in the water, the more efficiently your body's cells actually get hydrated by the water that you drink. The higher the TDS levels in the water, the greater the probability of harmful contaminants that can pose health risks or hinder the absorption of water molecules on the cellular level. 17 PPM of TDS = 1 grain of hardness. Highly efficient and accurate due to its advanced microprocessor technology. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990ppm. From 0-999ppm, the resolution is in increments of 1ppm. From 1,000 to 9,990ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Display: large and easy-to-read LCD screen. Factory Calibrated: recalibration is not necessary, but can be done easily with a watch screwdriver. There's no need for messy solutions to initially calibrate the meter. Range: 0 - 9990ppm (mg/L) Accuracy: +/- 2% ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit) Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1,000 hours of continuous use Dimensions: 14 x 2.3 x 1.5cm (5.5 x .9 x .55 inches) Weight: 32g (1.13 oz) Simple to use for Reverse Osmosis membrane monitoring. Measure the incoming water and the RO water. Divide the larger number into the smaller number and subtract that decimal from 1. The resulting decimal is the percent of TDS that the membrane is removing. We really like this tester and think that anyone who wants to know about the quality of their water should have one of these TDS Meter Testers.

Learn more about using TDS meters and total dissolved solids

TDS Meter - Easily Installs Inline
 

Price Each: $49.99
Sale Price: $39.99
Savings: $10.00

Tube Size

Quantity:

Check Volume Discounts


Email a Friend


TDS Meter Inline Tester- Dual Mode Reading - Easily Installs Inline - Very Simple To Use

TDS Meter - Dual Mode - Installs Inline - Check the TDS level with the push of a button. Now you can easily check to make sure the water from your reverse osmosis system is top quality. Measure the tap water coming in vs. the purified water going out of your system at any time. Very easy installation. Simply cut the line out from the RO membrane housing and install the inline probe between the membrane housing and the shutoff valve, when possible. The closer to the membrane housing the better. Insert the ends of the tube into the John Guest quick connectors on the TDS meter probe. Then cut the inlet feed water line to the system and install the other T/probe. FEATURES Displays TDS levels of the feed water and product water with in & out electrode probes. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with John Guest Quick-Connect T-fittings as shown. Installs quickly and easily. SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Cable Length: 24.5" (including sensor) Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1000 hours of continuous use Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) Weight: 79.4 g (2.8 oz.) Always know if your RO membrane is performing correctly!

Learn more about using TDS meters and total dissolved solids

Dow Corning ® 111 5 gram O-ring Silicone Lubricant and Sealant


Prevent Leaks!


Price Each: $3.99

Package Size

Quantity:

Check Volume Discounts


Email a Friend

Dow Corning (Molykote) ® 111 6 gram O-ring Silicone Lubricant and Sealant - Be sure to lube your O-rings to help prevent leaks.

Dow Corning/Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - 6 gram pillow pack. (like a ketchup packet) Great O-ring sealant and lubricant. FDA and NSF approved. (Do Not Use Petroleum Jelly As It May Break Down O-rings Or Housings) This is the same premium grade silicone sealant and lubricant used in underwater photography cameras, scuba gear and other underwater applications that simply can't afford leaks. Why not use the best for your reverse osmosis or drinking water filtration system?

Dow 111 Silicone MSDS Safety Sheet

Leak Controller for Reverse Osmosis Systems, Refrigerators, Ice Makers and Coffee Machines
 


Price Each: $79.99
Sale Price: $49.99
Savings: $30.00

Connector Size

Quantity:

Check Volume Discounts


Email a Friend

Leak Controller for Reverse Osmosis Systems, Water Coolers, Refrigerators, Ice Makers and Coffee Machines.

Save a flood inside the house. Prevent costly water damage. Automatically shut off the water to leaking Reverse Osmosis Systems, Water Coolers, Refrigerators, Ice Makers and Coffee Machines. Alarm flashes and beeps to notify you to the system shut down. Very simple to install and use. Brilliant design. Simply place the sensor (Similar in size to a small computer mouse) where water will collect below the system. Cut the incoming 1/4" or 3/8" water tube and insert each end into the quick connectors on the controller. When the sensor gets wet it shuts off the incoming water at the controller. Reset the sensor by wiping it dry. # AS-414 with 4 1/2' cord that connects the sensor. The Leak Controller is a great way to control costly leaks.

Pro Products Sani - System Sanitizer
 

Price Each: $7.99
Sale Price: $4.99
Savings: $3.00

Product Size


Quantity:
Check Volume Discounts


Email a Friend

Pro Products Sani System Sanitizer

Pro Products Sani System Sanitizer. 0.25 or 0.5 fl. oz. concentrate. Sani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Sani-System is now NSF certified! Directions for Use It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Sanitization of Interior Surfaces of Water Softeners and Reverse Osmosis (RO) Units. Water Softeners Sanitization should occur after initial installation, after the system is serviced and periodically during its use. Backwash the softener and add 1 ounce of sanitizer per 8 gallons of water (200 ppm active quaternary) to the brine tank well. (NOTE: standard systems capacity is 48 gallons,) (The brine tank should have water in it to permit the solution to be carried into the softener.) Proceed with the normal regeneration or interrupt the cycle after the brining step and let the softener soak for a minimum of 60 seconds. Backwash the softener with potable water to make sure all sanitizing solution is thoroughly rinsed from the unit before returning it to service. Reverse Osmosis (RO) Units Sanitization should occur after initial installation, after the system is serviced and periodically during its use. Turn off RO system, drain storage tank and remove membrane element and pre-filters. Put membrane element in a plastic bag so it remains wet. Fill empty pre-filter housing with 1 ounce of sanitizer per 8 gallons of water (200 ppm active sanitizer) and turn on raw water. (NOTE: standard system capacity is 2-3 gallons) After holding tank is full, let system stand idle for a minimum of 60 seconds. Turn off water. Drain holding tank. Before the system is put back into service, flush system with potable water to assure sanitizing solution is rinsed thoroughly form system. Follow the manufacturer’s directions for re-installation of new per-filters, membrane elements and post filter, membrane element and post filter. Sanitation of interior surfaces of Ice Machines, Water Coolers, Water holding tanks and Pressure tanks, Ice Machines Sanitization should occur after initial installation, after the machine is serviced and periodically during its use. Shut off incoming water line to machine. Prepare a solution of 1 oz. of sanitizer per 8 gallons of water (200 ppm active quaternary) Circulate solution through machine making user to wet all surfaces and allow a minimum contact of 60 seconds. Drain and completely flush system twice with portable water. Storage and disposal DO NOT CONTAMINATE WATER, FOOD OR FEED BY STORAGE OR DISPOSAL - Store in a dry place no lower in temperature then 50 degrees F or higher than 120 degrees F. Shipping information Non-hazardous. This is the best sanitizing solution available anywhere! Stock up and save.


Be sure to check our Parts Department for important parts such as TDS Testers For Reverse Osmosis Membranes, Replacement Tanks, O-rings , Filter Housing Wrenches, Faucets, Pumps, Fittings, UV Systems and more parts for your reverse osmosis pure water filtration system.   View maintenance and servicing tips online at our Installation & Trouble shooting Guide.

* Culligan ® is the registered trademark of Culligan, a division of Pentair, the manufacturer of Culligan ® brand water treatment equipment. 

Customer Service

My Account

Quick Ship Shipping Times

Testimonials

Add To Favorites

Email Reminder Service
Check Out

Copyright © 1999-2017 WaterFiltersOnline.com, LLC, Huntington, IN  46750 U.S.A., except those displayed and owned by their respective companies.  All rights reserved.  "Compatible" Legal Disclaimer.

Send Us Email

Replacement water filters and reverse osmosis membranes