Aquatec ® PSW 240 & PSW 340 Pressure Switch
water filters reverse osmosis membranes
 Free Filter Change Reminder Email Service - Sign Up Now water filters, replacement cartridges, reverse osmosis membranes, water tests, complete parts department


water filters, replacement cartridges, reverse osmosis membranes for Everpure, Ametek, Culligan, RainSoft, US Filter, Pentek, Plymouth, Harmsco, Aqua-Pure, EcoWater, Hydrotech, Whirlpool, GE
Home | Replacement Water Filters | Reverse Osmosis Systems | Whole House Water Filters
 Refrigerator Water Filters | Pool and Spa Filters | Boat & RV Water Filters | Parts Department
 Installation and Trouble Shooting Guide | Gift GuideMy Account | Check Out

 
water filters reverse osmosis membranes
  Replacement water filters and reverse osmosis membranes - Visa accepted Replacement water filters and reverse osmosis membranes - Master Card accepted

Large selection of replacement water filters, reverse osmosis membranes, testing kits and water filtration repair parts.  From one water filter or reverse osmosis membrane to case quantity discounts.
LOW PRICES and FAST SHIPPING SINCE 1999 !
99.5% Of All Items In Stock For Same Day Shipping!

Replacement water filters and reverse osmosis membranes - Discover accepted Replacement water filters and reverse osmosis membranes -Amex accepted  
water filters reverse osmosis membranes
 

Product Details for Aquatec ® PSW 240 & PSW 340 Pressure Switch

Check Out
Aquatec ® PSW 240 & PSW 340 Pressure Switch Aquatec ® PSW 240 & PSW 340 Pressure Switch.  Compact 
High reliability - 100% factory tested - Built-in John Guest connectors - Aquatec's PSW tank pressure sensing electrical switches are intended for in-line mounting as close to the hydropneumatic product water tank as possible. Its purpose is to turn off the Booster Pump when the tank is full. Normally closed switch set for 40 PSI. The PSW, when used with a typical under-counter RO system, enables the hydraulic shut-off valve to open and close very reliably and positively.   The PSI trigger point can be adjusted using a 050 Allen Wrench inserted into the small chrome nut in one of the two adjacent circular surfaces on the switch.   Simply turn to  adjust the actual water PSI shut off point for your system.  Counter clockwise will decrease the off pressure of the pump and clockwise will increase the off pressure. To make the pump turn off at a lower pressure setting turn the screw counter clockwise.  Set the switch once the system has filled and shut off.  Our techs love these.   NSF Approved - Flow Through Design (i.e. no Dead Legs)  Single Pole, Double Throw Switch.  WETTED MATERIALS Polypropylene, Santoprene, EPDM
SWITCH RATING: 250 VAC, 15 amp, UL listed.  ELECTRICAL CONNECTION: AMP Mate-N-Lok.  The PSW Series also includes a modular connector for plug-and-play integration with Aquatec’s other system components.  Easy installation and simple to use.  Choose either the PSW 240 1/4 Product ID: aquatec-psw    Category: Pumps

Aquatec ® PSW 240 & PSW 340 Pressure Switch

Description: Aquatec ® PSW 240 & PSW 340 Pressure Switch. Compact High reliability - 100% factory tested - Built-in John Guest connectors - Aquatec's PSW tank pressure sensing electrical switches are intended for in-line mounting as close to the hydropneumatic product water tank as possible. Its purpose is to turn off the Booster Pump when the tank is full. Normally closed switch set for 40 PSI. The PSW, when used with a typical under-counter RO system, enables the hydraulic shut-off valve to open and close very reliably and positively. The PSI trigger point can be adjusted using a 050 Allen Wrench inserted into the small chrome nut in one of the two adjacent circular surfaces on the switch. Simply turn to adjust the actual water PSI shut off point for your system. Counter clockwise will decrease the off pressure of the pump and clockwise will increase the off pressure. To make the pump turn off at a lower pressure setting turn the screw counter clockwise. Set the switch once the system has filled and shut off. Our techs love these. NSF Approved - Flow Through Design (i.e. no Dead Legs) Single Pole, Double Throw Switch. WETTED MATERIALS Polypropylene, Santoprene, EPDM SWITCH RATING: 250 VAC, 15 amp, UL listed. ELECTRICAL CONNECTION: AMP Mate-N-Lok. The PSW Series also includes a modular connector for plug-and-play integration with Aquatec’s other system components. Easy installation and simple to use. Choose either the PSW 240 1/4" or PSW 340 3/8".

Price Each:  $15.99
Check Volume Discounts

Tube Size
Quantity:

 

Home | Current Order | Wish List

Be sure to check our Parts Department for important parts such as TDS Testers, Replacement Tanks, O-rings , Housing Wrenches and more parts for your pure water filtration system.

Customer Service

My Account

Quick Ship Shipping Times

Testimonials

Add To Favorites

Email Reminder Service
Check Out

Copyright © 1999-2017 WaterFiltersOnline.com, LLC, Huntington, IN  46750 U.S.A., except those displayed and owned by their respective companies.  All rights reserved.  "Compatible" Legal Disclaimer.

Send Us Email

Replacement water filters and reverse osmosis membranes