Large selection of replacement water filters, reverse osmosis membranes, testing kits and water filter system repair parts. From one water filter or membrane to case quantity discounts.


99.5% Of All Items In Stock For Same Day Shipping!

Omnipure CL10RO-T/33-B 1/4" FNPT Inline GAC Replacement Water Filter

$15.99 Special Price $11.99
  • Buy 2 for $10.99 each and save 8%
  • Buy 6 for $9.99 each and save 17%
In stock

Omnipure CL10RO-T/33-B 1/4" FNPT Inline GAC Replacement Water Filter (granular activated carbon)

Omnipure CL10RO-T/33-B 1/4" FNPT Inline GAC Filter (granular activated carbon)


Flow Rate

0.5 gpm

Maximum Operating Pressure

125 psig

Operating Temperature

2 to 38 ºC35 to 100 ºF

Rated Capacity

1,500 gal/1 Year

Reduction Claim

Chlorine, taste, color, and odor reduction


ANSI (American National Standards Institute)NSF (National Sanitation Foundation)


Icemakers, Refrigerators, Under-the-counter, Drinking fountains, Beverage Equipment, R.O. Systems, and in Conjunction with Commercial Purification Systems.

ANSI (American National Standards Institute) / NSF (National Sanitation Foundation) International Standards

Tested and Certified by NSF International against ANSI / NSF Standard 42 for Taste and Odor Reduction and Chlorine Reductions Class I.

General Installation / Operation / Maintenance Requirements

  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. 
  • Replace cartridge when rated capacity (1,500 gallons/1 year) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Additional Information

Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. And finally, all threaded connections are precision cut by machine with results in the more accurate and repeatable thread possible.

Special Notices

  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
You may also be interested in the following product(s)

Related Categories