Large selection of replacement water filters, reverse osmosis membranes, testing kits and water filter system repair parts. From one water filter or membrane to case quantity discounts.

LOW PRICES and FAST SHIPPING ONLINE SINCE 1999 !

99.5% Of All Items In Stock For Same Day Shipping!

Omnifilter U700 Drinking Water Filtration System

Omnifilter U700 Drinking Water Filtration System

OMNIFILTER ® U700 replacement water filter cartridges, o-rings, filter housing wrenches, tubes, valves and DIY HELP Guides.

 

The Omnifilter U700 system originally came with one BC1 sediment pre filter, one GAC-1 filter and one TC3 carbon block filter.  The BC1 and TC3 are discontinued.  The BC1 is replaced by the RS2 shown below.  The TC3 has been replaced by the CB3, but unfortuately the new CB3 will not fit this older system.  The new CB3 is slightly larger in diameter and will not drop all of the way into the filter housing.    But don't worry, we do have replacement filters that fit as shown below.

  1. Pentek SW-1A # 150539 SW1 Slim Line Water Filter Housing Spanner Wrench
    Pentek SW-1A # 150539 SW1 Slim Line Water Filter Housing Spanner Wrench
    Pentek SW-1 # 150539 SW1 Slim Line Water Filter Housing Spanner Wrench Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands. SW-1 Water Filter Housing Wrench. Fits 4" Slim Line Housings. (Slim Line Housings Have A 3 1/2" diameter "O" Ring) Ametek # 150294 Only for use in loosening filter housings, never to tighten. Overtightening may cause damage to the O-rings and make re-opening VERY difficult. Hand tighten only. Fits most standard style RO systems. Replaces 150294. For really stubborn filter housings our technicians will use two wrenches together for maximum power where one wrench might break or not do the job. Our techs know the tricks. Order New O-rings And Be Sure To Lube Them With Dow 111 Silicone Sealant To Prevent Leaks
    Learn More
    $9.99 Special Price $6.99 As low as $4.99
  2. OMNIFILTER K4 ® O-rings
    OMNIFILTER K4 Replacement Water Filter Housing O-rings - Set
    OMNIFILTER K4 ® O-rings - Price per set of 4. Fits Under Sink Models CBF1, OT32,CBF3, SFM2,CBF20, RO2000, OB3 And Whole House Models OB1, OB5, R12, R14. Be sure to order Dow 111 Silicone Sealant to Prevent Leaks. The OmniFilter K4 Replacement O-rings pack contains the following four o-rings: •1 Blue K4: fits OB3, SFM2 Series A, CBF1, CBF3 Series A, OT32 Series A, RO2000, R14, CBF20 and OB1. •1 Black WC9-13: fits white-head OB5 and OCT2. •1 Black OK40: fits OB1 Series A, OB5 Series A, R12 Series A and U25 Series E. •1 Black OK30: fits CBF1 Series A, CBF3 Series B, OT32 Series B, SFM2 Series B, RO2000 Series B
    Learn More
    $13.99 Special Price $9.95 As low as $7.99
  3. Molykote-From DOw Corning- 111 Compound-6 Gram O-ring Silicone Lubricant & Sealant-Dow-111-5-gram-1000
    Dow Corning - Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - Be sure to lube your O-rings to help prevent leaks.
    Dow Corning/Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - 6 gram pillow pack. (like a ketchup packet) Great O-ring sealant and lubricant. FDA and NSF approved. (Do Not Use Petroleum Jelly As It May Break Down O-rings Or Housings) This is the same premium grade silicone sealant and lubricant used in underwater photography cameras, scuba gear and other underwater applications that simply can't afford leaks. Why not use the best for your reverse osmosis or drinking water filtration system?

    Dow 111 Silicone MSDS Safety Sheet

    Learn More
    $5.99 Special Price $3.99 As low as $1.79
  4. Pro Products Sani System RO & Water Filtration System Sanitizer
    Pro Products Sani System RO & Water Filtration System Sanitizer
    Sani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Alos NSF certified. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Pro Products Sani System Sanitizer. 0.25 fl. oz. concentrate is perfect for your RO reverse osmosis drinking water system sanitizing..
    Learn More
    $7.99 Special Price $4.99 As low as $2.99
  5. Stainless Steel Designer Faucet for RO Reverse Osmosis & Drinking Water Filtration Systems
    Stainless Steel Designer Faucet for RO Reverse Osmosis & Drinking Water Filtration Systems
    Stainless Steel Designer Faucet for Drinking Water Systems. Beautiful designer faucet for beautiful kitchens. Air Gap / Non Air Gap design, single or three tube connection. Made of high quality 304 stainless steel incorporating a smooth operating ceramic disk element for extended reliability and quality. Great replacement upgrade for RO Reverse Osmosis and drinking water filtration systems. Lever Style Handle. High Reach Neck Design (12" / 305mm) 360 Degree Swivel Neck. Unique Protective Spout Tip which Prevents After Drip. 2 1/4" Base Diameter (57 mm) Drilled Hole Size Needed is 7/8".
    Learn More
    $219.99 Special Price $99.99
  6. John Guest Super Speedfit Quick Connector - Male - Elbow
    John Guest ® Super Speedfit Quick Connector - Male - Elbow
    John Guest ® Super Speedfit Quick Connector - Male - Elbow - John Guest Super Speedfit Quick Connectors - Male - MNPT - Sold in pairs. Price is per pair. These fittings are manufactured in gray acetal copolymer with food grade nitrile ‘o’ ring, making them especially suitable for applications involving foodstuff and potable liquids like reverse osmosis drinking water. They are equally suitable for air and inert gasses and can therefore be used on CO2 lines, pneumatic applications, and vacuum. For more than a decade, John Guest has been supplying Super Speedfit fittings to the Water Purification market for drinking water applications in homes, restaurants and industry. John Guest products are listed with the WRC(UK), NSF(US) and SK(Germany). PI480821S , PI480822S , PI480823S , PI481222S , PI481223S
    Learn More
    $8.99 Special Price $4.99 As low as $3.99
  7. Easy Tap Water Feed Valve for Water Filter Systems - 2000
    Easy Tap Water Feed Valve For Water Filter Systems 3/8" Feed Tube
    Easy Tap Water Feed Valve - High flow tap valve. Follow the pipe up from the shut-off valve toward faucet until you reach a coupling nut (may be all the way up to the faucet). Unscrew coupling nut. Screw brass easy tap onto previous location of coupling nut. Hand tighten and then one more complete turn with wrench. Re-attach water line coupling nut to easy tap. The valve on the side of the easy tap is the shut off valve for your new RO system. If the handle is turned clockwise all of the way, this is the "OFF" position for your new RO system. Counterclockwise all of the way is the "ON" position.
    Learn More
    $16.99 Special Price $8.99 As low as $4.99
  8. Chiller Daddy CHL-750XL Under Sink Water Chiller - 110 Volt
    Chiller Daddy CHL-750XL Under Sink Water Chiller - 110 Volt

    110 Volt Chiller Daddy ® CHL-750XL Under Sink Water Chiller -  NEW TANK IS 25% LARGER than our previous chillers.  Output Cold Tank Volume : 3 liter (0.8 gallon) Exterior cabinet is made of RUST FREE 304 SS Stainless Steel. Cold Water Container is made of SUS304 Stainless Steel. Inlets and outlets are 1/4" stainless steel 304. Includes a pair of quick connectors for a simple hook up. Output of Cold Water : 1.75 Gallons Per Hour (6.6 Liters 5L/H (<10C) Continuous Cold Water Output(cc/hr). This is a high output, heavy duty undersink drinking water chiller. Great for use with a Reverse Osmosis System or drinking water filter system.

    Learn More
    $499.99 Special Price $395.00 As low as $354.00

Be sure to check our Parts Department for important parts such as TDS Testers For Reverse Osmosis Membranes, Replacement Tanks, O-rings , Filter Housing Wrenches, Faucets, Pumps, Fittings, UV Systems and more parts for your reverse osmosis pure water filtration system.   View maintenance and servicing tips online at our Installation & Trouble shooting Guide.




OMNIFILTER * IS THE REGISTERED TRADEMARK OF PENTAIR, THE MANUFACTURER OF OMNIFILTER WATER TREATMENT EQUIPMENT.  THE REPLACEMENT FILTERS AND MEMBRANES LISTED ABOVE ARE MANUFACTURED BY PENTAIR.  THESE FILTERS AND MEMBRANES ARE MANUFACTURED FOR USE IN OMNIFILTER ® BRAND WATER TREATMENT EQUIPMENT, OTHER COMPONANTS ARE MANUFACTURED BY OTHER VARIOUS MANUFACTURERS.