Four Stage Standard RO Reverse Osmosis Replacement Water Filter Change Kit.   (2) 5 micron sediment Pre Filters, (1) 10 micron Carbon Block Filter and (1) Inline GAC Post Filter.  RO reverse osmosis membranes sold separately.  

Learn More

GE Osmonics ® Purtrex PX-5-978 5 Micron Sediment Water Pre Filter. True-graded density pure polypropylene depth replacement water filter. # 93023 9 7/8" long X 2 1/2" diameter. 40 per case, sold individually. Order a case and save even more. Learn More

10 Micron Premium Carbon Block Filter. Replaces KX Carbon Block Water Filter # 10-250-190-975 Compatible Replacement. The perfect carbon block for your standard reverse osmosis system. Extruded Carbon Block Water Filter. 9 3/4" long X 2 1/2" diameter OD X 1 1/4" diameter ID. 20 per case, sold individually. Order a case and save even more. GGN-10-2-BLOCK Learn More

Omnipure ® CL-10RO-T/33 GAC - 10" X 2" Carbon Inline Replacement Post Water Filter - GAC (granular activated carbon) Acid Washed Carbon - Should be changed at least every 12 months. 25 per case, sold individually. Order a case and save even more. Learn More

Dow Filmtec ® TW30-1812-50 TFC 50 GPD RO reverse osmosis membrane - standard size 1.75" X 11.75" Part # 80722 Learn How To Upgrade Your Reverse Osmosis Membrane Capacity Learn More

Flow Restrictor - capillary - 500 ml 1/4" quick connect fittings. 

Premium inline reverse osmosis membrane flow restrictor - Our in-line capillary flow restrictors are simple to install. Simply push the 1/4" poly tube firmly into the quick connectors and you are done. Be sure that you order the flow restrictor size to match your reverse osmosis membrane size. Arrow on side points toward the drain. Very simple to install.

Learn More

Pentek SW-1 # 150539 SW1 Slim Line Water Filter Housing Spanner Wrench Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands. SW-1 Water Filter Housing Wrench. Fits 4" Slim Line Housings. (Slim Line Housings Have A 3 1/2" diameter "O" Ring) Ametek # 150294 Only for use in loosening filter housings, never to tighten. Overtightening may cause damage to the O-rings and make re-opening VERY difficult. Hand tighten only. Fits most standard style RO systems. Replaces 150294. For really stubborn filter housings our technicians will use two wrenches together for maximum power where one wrench might break or not do the job. Our techs know the tricks. Order New O-rings And Be Sure To Lube Them With Dow 111 Silicone Sealant To Prevent Leaks Learn More

Pentek # 151121 O-Ring For Slim Line Water Filter Housing Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands. O-Ring For Slim Line Water Filter Housing. Buna-N FDA Grade. (Slim Line Housings Use A 3 1/2" diameter "O" Ring) Ametek # 151121 Same as Culligan OR-38 O-ring. Learn More

Dow Corning/Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - 6 gram pillow pack. (like a ketchup packet) Great O-ring sealant and lubricant. FDA and NSF approved. (Do Not Use Petroleum Jelly As It May Break Down O-rings Or Housings) This is the same premium grade silicone sealant and lubricant used in underwater photography cameras, scuba gear and other underwater applications that simply can't afford leaks. Why not use the best for your reverse osmosis or drinking water filtration system?

Dow 111 Silicone MSDS Safety Sheet

Learn More

Sani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Alos NSF certified. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Pro Products Sani System Sanitizer. 0.25 fl. oz. concentrate is perfect for your RO reverse osmosis drinking water system sanitizing.. Learn More

LONG REACH, AIR GAP FAUCET IN CHROME

Learn More

Puroflo FLR-868 Long Reach Chrome Non-Air Gap Premium Faucet is NSF Certified. Smooth operating ceramic disk design with 12" High Reach Neck Design. California Prop. 65 and AB1953 compliant. Low Lead Level Learn More

Stainless Steel Designer Faucet for Drinking Water Systems. Beautiful designer faucet for beautiful kitchens. Air Gap / Non Air Gap design, single or three tube connection. Made of high quality 304 stainless steel incorporating a smooth operating ceramic disk element for extended reliability and quality. Great replacement upgrade for RO Reverse Osmosis and drinking water filtration systems. Lever Style Handle. High Reach Neck Design (12" / 305mm) 360 Degree Swivel Neck. Unique Protective Spout Tip which Prevents After Drip. 2 1/4" Base Diameter (57 mm) Drilled Hole Size Needed is 7/8". Learn More

4 Gallon Reverse Osmosis Tank GGN-Tank-4 Pro 3.2. This is the perfect replacement tank for most RO reverse osmosis systems.   Stainless Steel valve connector.  Perfect replacement for all home RO reverse osmosis drinking water systems.  

Learn More

4 Gallon Water Tank for RO Reverse Osmosis Drinking Water Systems - GGN-Tank-PL4- Plastic 4 Gallon (15L) Water Storage Tank. 10.83" Diameter X 16.15" Height. NSF Certified. UPC #850901003514 Learn More

SS Stainless Steel Reverse Osmosis 4.4 Gallon Total Capacity Tank

This is one of the finest RO tanks we have ever seen. The patented O-ring seal on the air stem assures "set and forget" pressure settings. Keeping the pressure in the tank set correctly is an important factor in operating your RO system. Approximately 14" high (without the tank valve) X 11" in diameter.

Learn More

Air pressure gauge for reverse osmosis water accumulator tanks - Specially calibrated for reverse osmosis system tanks. Scale from 1 to 20 PSI. Large scale reading over small PSI range allows optimum accuracy. Just like car tires lose air pressure, so does the bladder of your reverse osmosis water accumulator tank. Improper tank air pressure will cause your system to operate improperly. This is a must for all reverse osmosis system owners. Learn More

Inversion Stand for Water Tank on  Reverse Osmosis Systems.  Flip the tank over and remove the weight of the water from the bladder.  Pressure and storage capacity are unchanged.  Extends the life of your reverse osmosis water tank.

Learn More

TDS Meter - Dual Mode - Installs Inline - Check the TDS level with the push of a button. Now you can easily check to make sure the water from your reverse osmosis system is top quality. Measure the tap water coming in vs. the purified water going out of your system at any time. Very easy installation. FEATURES Displays TDS levels of the feed water and product water with in & out electrode probes. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Comes equipped with John Guest Quick-Connect T-fittings as shown. Installs quickly and easily. SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Always know if your RO membrane is performing correctly! Learn More

TDS Meter - Tester. The Only Way To Know If Your Reverse Osmosis RO Membrane Is Performing Correctly - Tests for TDS - Total Dissolved Solids. A Must For All RO System Owners. Compare Incoming Feed Water To Treated Water - Replace Membrane If Less Than 80% of TDS Is Being Removed - The lower the TDS level in the water, the more efficiently your body's cells actually get hydrated by the water that you drink. The higher the TDS levels in the water, the greater the probability of harmful contaminants that can pose health risks or hinder the absorption of water molecules on the cellular level. Simple to use for Reverse Osmosis membrane monitoring. We really like this tester and think that anyone who wants to know about the quality of their water should have one of these TDS Meter Testers to monitor their RO membrane. Learn More

Auto Shut Off RO 1 - Automatic shutoff valve for reverse osmosis systems. ASO ASV Easy to use 1/4" OD Tube Jaco connectors included. - The "in & out" markings are on the top of the valve. The top side of the valve is the high pressure side and the bottom side is the low pressure side. The high pressure from the filter housings goes to the "in" on the top of the valve. Then the high pressure "out" goes to the membrane housing "in". The membrane housing low pressure "out" connects to the "in" on the bottom side of the valve. The "out" on the bottom goes to the tank. The valve automatically shuts off production when the tank pressure reaches approximately 65% of the incoming line pressure. Learn More

Inline Water Shut Off Valve With 1/4" or 3/8" Quick Connect Fittings - Very easy to install and use. - Great for refrigerators, UV systems, chillers, hot pots, coffee machines, ice machines etc. Learn More

Jaco ® Elbow Connector Fitting - 90 Degree - Sold as a Pair. Tube x MNPT Thread Sizes. Learn More

ohn Guest ® Super Speedfit Quick Connector - Male - Elbow - John Guest Super Speedfit Quick Connectors - Male - MNPT - Sold in pairs. Price is per pair. These fittings are manufactured in gray acetal copolymer with food grade nitrile ‘o’ ring, making them especially suitable for applications involving foodstuff and potable liquids like reverse osmosis drinking water. They are equally suitable for air and inert gasses and can therefore be used on CO2 lines, pneumatic applications, and vacuum. For more than a decade, John Guest has been supplying Super Speedfit fittings to the Water Purification market for drinking water applications in homes, restaurants and industry. John Guest products are listed with the WRC(UK), NSF(US) and SK(Germany). PI480821S , PI480822S , PI480823S , PI481222S , PI481223S Learn More

John Guest ® Tee Connector - Quick Connectors - All equal size connections or one port different for adaption. The body is produced in acetal copolymer. 'O'Rings are nitrile rubber. The collet is produced in acetal copolymer with stainless steel teeth. PI0208S , PI0212S , PI301208S , PI301612S. Learn More

John Guest ® Angle Stop Water Valve - Makes installation a snap. Very simple to use. PPASV121208W and PPASV121212W Learn More

Easy Tap Water Feed Valve - High flow tap valve. Follow the pipe up from the shut-off valve toward faucet until you reach a coupling nut (may be all the way up to the faucet). Unscrew coupling nut. Screw brass easy tap onto previous location of coupling nut. Hand tighten and then one more complete turn with wrench. Re-attach water line coupling nut to easy tap. The valve on the side of the easy tap is the shut off valve for your new RO system. If the handle is turned clockwise all of the way, this is the "OFF" position for your new RO system. Counterclockwise all of the way is the "ON" position. Learn More

John Guest ® Poly Tubing 1/4" For Pure Drinking Filter Water Systems

Learn More

Chiller Daddy ® CHL-750XL Under Sink Water Chiller -  NEW TANK IS 25% LARGER than our previous chillers.  Output Cold Tank Volume : 3 liter (0.8 gallon) Exterior cabinet is made of RUST FREE 304 SS Stainless Steel. Cold Water Container is made of SUS304 Stainless Steel. Inlets and outlets are 1/4" stainless steel 304. Includes a pair of quick connectors for a simple hook up. Output of Cold Water : 1.34 Gallons Per Hour (5 Liters 5L/H (<10C) Continuous Cold Water Output(cc/hr) 5,400. This is a high output, heavy duty undersink drinking water chiller. Great for use with a Reverse Osmosis System or drinking water filter system.

Learn More

304 Stainless Steel 1 GPM UV Assembly With 1/4" FNPT Connections. 6 watt Phillips UV Lamp, quartz sleeve and 100 volt transformer.  Individually boxed.  Great addition to any RO reverse osmosis system or undercounter drinking water filter system.

Learn More